Adya Clarity

Adya 2oz square.jpg
Adya 2oz square.jpg

Adya Clarity


FREE POSTAGE in Australia

***Adya Clarity was clinically trialed in 2014 and showed impressive detoxification results***

  • Aluminum levels were reduced from day one of this study to day thirty by an average of 42%. 
  • Lead levels were reduced from day one of this study to day thirty of this study by an overall average of 40% 
  • Mercury levels were reduced from day one of this study to day thirty by an average of 42%. 
  • Arsenic levels were reduced from day one of this study to day thirty of this study by an overall average of 45%.
Add To Cart

What is Black Mica Solution (Adya Clarity)?

Black Mica Solution is simply Ionic Sulfate Minerals extracted from magnetic-rich, black mica. Not only does it purify water, but it actually structures the water, increasing the oxygen content, and pulls out the unhealthy “hard” inorganic minerals, including chlorine and fluoride. It is a high potency ionic mineral water containing calcium, iron, potassium, magnesium and 82 other trace minerals.

Magnetism is one of the most powerful forces of nature. Black Mica Solution’s Magnetic Sulfate Minerals utilize this powerful force by attracting contaminants and clumping them into larger sized particulates. As black mica magnetic minerals are busy clumping impurities together, they are also activating the oxygen within the water. What is oxygenated water? It’s water that is ready to go to work in your body to provide oxygen for energy. Black mica negatively charged minerals attract and bind with the positively charged toxins. Even sewage water has been shown to convert to drinking water after adding Black Mica Solution.

Tests have shown that Adya Clarity effectively removes, or significantly reduces agricultural chemicals, disinfectants, heavy metals, industrial chemicals, microorganisms and pharmaceuticals.  All of these are found in drinking water and negatively impact our health. 

How to use Black Mica Solution

To create clean, oxygenated, fresh tasting water.

The general dilution rate is 1 part of Adya Clarity to 1000 parts of water.

When you put Adya Clarity into water, it will often turn cloudy within minutes, and brownish "sludge" will sink to the bottom of the container over hours. This sludge is the contaminants in the water that have been neutralised by the Adya Clarity. The best way to remove this sludge is to use a gravity filter as pictured on the left. 

  • Add 1-2 teaspoons of water to the top part of the filter (more needed if your water is dirty or contaminated). The top part of the filter will contain the sludge, and can be cleaned regularly, the bottom part will have clean, pure water. You should drink approx. 1.5 litres of this water per day (depending on your size).
  • Add 5 drops per cupful of this water just before drinking.

    The 1-2 teaspoons of Adya Clarity added to the top of the filter will purify the water. The extra 5 drops per cup is added to the already purified water, and goes into your body to help purify you!

    A 32oz bottle will last about 7 months for a single person using the above dosages.

    Alternately, you can do the initial purification in any container, and pour off most of the water, leaving the sludge in the bottom, or the sludge can be strained using coffee filters or something similar.

    Some people recommend using "super shots" of Adya Clarity to detox quickly. Whilst this is probably helpful, in light of the clinical trial results, it is probably unnecessary.

Bath or Hot Tub Water Treatment

Depending on the size of your bath or hot tub, add 1 part of Adya Clarity to 1000 parts of water in your tub, just as you would when making treated drinking water. Mix through the water by hand a few times, or turn on your hot tub and let it run for 1 minute to mix your Adya Clarity throughout your hot tub pump and piping. If possible, leave the cover off your hot tub for 24 hours to allow any residual chlorine to be removed by escaping into the air in a gas form. It may not be pleasant to use the hot tub during this time since the smell could be quite strong. Do not add any other typical hot tub water treatment as it will no longer be necessary. This treatment of your hot tub water will last for up to 8 months, keeping your hot tub water clean and free of contaminants without the use of any harsh chemicals.

Spray/mist your body with the Adya Clarity treated water after showering

You may wish to help neutralize the bad effects of chlorine or even fluoride on your skin, if you are showering with the tap water. Following your regular shower and removing most of the drops of water left on your skin, spray/ mist your body all over with the Adya Clarity treated water before toweling dry. (You can add extra 2 or 3 more drops of Adya Water in the spray/mist bottle to make it a little more concentrated). Use your hands to rub this moisture all over your skin. This will help to rid your skin of the residual chlorine or fluoride and will assist the skin in clearing up any unwanted blemishes. Now you can towel dry feeling truly clean and refreshed.

Preparing Food with Adya Clarity

When cleaning fruits or vegetables before eating, use Adya Clarity treated drinking water to wash/rinse your food before using them in your food preparation. This will ensure that they will be as free of contaminants as possible. You can also use the Adya treated drinking water in place of regular water when making soups or other dishes requiring the addition of water.

Treating Burns, Sunburn, Bee or Wasp Stings, Cuts and Bruises with Adya Clarity

If you encounter any of the above, you can dab some Adya Clarity full strength on the area. For severe burns and open wounds, you will want to dilute the Adya Clarity or even just use the Adya treated drinking water to soothe the area. Some burning sensations may occur, especially on the more severe wounds as they are more tender. The burning sensations will go away shortly, as the area becomes cleansed of contaminants.

Background of Black Mica Solution

Approximately 45 years ago, Dr. Asao Shimanishi was admiring a picturesque landscape on an island off the coast of Japan when he noticed a shapely pine tree growing out of a boulder surrounded by the Pacific Ocean. He thought, “How does this tree sustain its life sitting on a boulder?  Where do its nutrients come from?  From the boulder, perhaps?” This was his guess, but how?  His conclusion was that the tree’s hair-like roots (like our capillaries) had a natural ability to extract minerals from the boulder and the rest was up to the rain and sun for its health.He studied the boulder the tree was growing out of and found that it consisted of Biotite (Black Mica) embedded in Granite.

After decades of research and a global search for this specific Biotite, Dr. Shimanishi discovered it in his own country – Japan.

Dr. Shimanish created a patented process to extract the minerals from the Biotite for water purification. Eventually he become the leading authority of the treament and cleaning of water in Japan. His extraordinary discovery has led to amazing advancements in health, agriculture, livestock, horticulture, aquatics, raw sewage treament, and waste water treament. Dr. Shimanishi has worked with household names including Sony, Toyota, Hitachi, Matsushita and more.